王中王论坛香港

Welcome to Zhengzhou Kaiyuan Flooring Engineering Materials Co., Ltd.!

Add to favorites

Setup as front page

■ Skills to solve the problem of floor coating spraying construction

■ Use anti-static floor paint to solve the problem of static electricity on the ground

■ Preparation of floor coatings before use

Zhengzhou Kaiyuan Flooring Engineering Materials Co., Ltd.

Manager Zhao: 15803889061

Phone: 0371-67133330 400-000-8464

Fax: 0371-60121005

Website: http://banddigs.com

Company Address: No. 26 Dongqing Street, High-tech Zone, Zhengzhou

Epoxy flooring series

王中王论坛香港 > Epoxy floor series

Epoxy flooring series

Epoxy flooring series

Epoxy floor paint is a floor paint produced using a mixture of epoxy resin and curing agent. Epoxy floor paint has the characteristics of strong acid and alkali resistance, abrasion resistance, pressure resistance, impact resistance, mildew resistance, water resistance, dust resistance, slip resistance, antistatic, electromagnetic wave and other characteristics. The colors are bright and diverse, and easy to clean. It uses a one-time coating process, no matter how large the area is, there are no joints, and it is also a dust-free material with strong adhesion, abrasion resistance and strong hardness.
Epoxy floor paint is widely used in electronics factories, machinery manufacturers, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing plants, Textile, tobacco factory, candy factory, brewery, beverage factory, meat processing factory, parking lot and other surface coating. It has been accepted and used by many domestic manufacturers.
(I) Thin coating epoxy floor
Floor features: colorful appearance, smooth and beautiful; strong adhesion, dust and wear resistance, oil resistance; easy construction, easy recoating and color change, economical and applicable.
Applicable places: clothing factories, food factories, electronics factories, textile factories, machinery factories, pharmaceutical factories, feed factories, furniture factories, various light industry factories, workshops, warehouses, parking lots, etc.
Construction process:
① Waterproof treatment: the ground floor must be waterproofed;
② Plain treatment: grinding, repairing and dust removal according to the condition of the plain;
③ Epoxy primer: Roll coating with a super strong epoxy primer with permeability and adhesion to enhance surface adhesion;
④Epoxy soil: According to the actual needs of construction of several roads, it is required to achieve a flat and no holes, no batch of knife and sand marks shall prevail;
⑤Epoxy topcoat: solvent-based epoxy topcoat or anti-slip topcoat is applied by two rollers. After the completion, the overall surface is bright and clean, the color is uniform, and there is no hollow drum;
⑥ Construction is completed: people can be loaded after 24 hours, and pressure can be heavy after 72 hours. (25 ° C prevails, the opening time at low temperature needs to be extended appropriately)
(2) Self-leveling of solvent-free epoxy resin
Floor features: solvent-free system, in line with environmental protection concept; smooth surface, beautiful, highly clean and dust-free; strong adhesion, impact resistance, pressure resistance, wear resistance, dust and moisture resistance; chemical resistance, oil resistance; mechanical strength High and long life.
Applicable places: microelectronics and pharmaceutical industries that require high cleanliness, aseptic and dust-free, beautiful appearance, and workshops, warehouses, etc. that require wear resistance, impact resistance, heavy pressure resistance, and chemical corrosion resistance; can also be used in offices, hospitals, Schools, shopping malls, classrooms and other places.
Construction process:
① Waterproof treatment: the ground floor must be waterproofed;
② Plain treatment: grinding, repairing and dust removal according to the condition of the plain;
③ Epoxy primer: Roll coating with a super strong epoxy primer with permeability and adhesion to enhance surface adhesion;
④ Middle coating: After the primer is dried and formed into a film, remove the sundries on the surface and add the prepared epoxy resin mortar.
⑤Epoxy soil: According to the actual needs of construction of several roads, it is required to achieve a flat and no holes, no batch of knife and sand marks shall prevail;
⑥Epoxy topcoat: two coats of non-solvent epoxy topcoat, the overall surface is bright and clean after the completion, the color is uniform, and there is no hollow drum;
完成 Construction is completed: people can be loaded after 24 hours, and pressure can be heavy after 72 hours. (25 ° C prevails, the opening time at low temperature needs to be extended appropriately)
(Three) solvent-free anti-static self-leveling floor
Floor features: Anti-static coating floor is a method of adding conductive non-solvent synthetic resin to conductive materials and applying it on concrete or mortar floor to achieve anti-static effect.
Applicable places: military industry, aerospace industry, electronics, pharmaceuticals, electrical, printing industry, computer rooms and various flammable and explosive factories, warehouses and other grounds.
Construction process:
① Waterproof treatment: the ground floor must be waterproofed;
② Plain treatment: grinding, repairing and dust removal according to the condition of the plain;
③ Epoxy primer: Roll coating with a highly conductive conductive primer with high permeability and adhesion to enhance surface adhesion, while laying a conductive copper sheet.
④ Intermediate coating: Stir according to the specified amount and apply with roller coating or doctor blade.
⑤Anti-static topcoat: Roll-coat the antistatic topcoat according to the thickness of the customer. After the completion, the overall surface is bright and clean, the color is uniform, and there is no hollow drum;
⑥ Construction is completed: people can be picked up after 24 hours, and pressure can be heavy after 72 hours. (25 ° C prevails, the opening time at low temperature needs to be extended appropriately)
(4) Self-leveling floor of heavy anticorrosive epoxy resin
Surface layer: thin coated smooth surface or self-leveling smooth surface, texture-like, sand-blasting non-slip layer
Floor features: resin mortar and fiber cloth combined; resistance to a variety of chemicals; pressure resistance, wear resistance, long life; can withstand heavy loads.
Scope of application: pH protection ground for metallurgical, chemical, pharmaceutical, electroplating, water treatment and other industries.
Construction process:
① Waterproof treatment: The strength of the base surface is above C25, and the ground floor of the ground floor must be waterproofed.
② Plain processing: special grinding machine grinding or recycling shot blasting;
③ Epoxy primer: Roll coating with a super strong epoxy primer with permeability and adhesion to enhance surface adhesion;
④Fiberglass cloth layer: The whole floor is covered with fiberglass cloth and leveled;
⑤ Middle coating: According to the thickness required by the customer, the epoxy sand slurry is scraped and polished on the surface;
⑥ Epoxy topcoat: According to the thickness required by the customer, use (3-5MM) serrated trowel to anticorrosive epoxy floor paint topcoat layer;
完成 Construction is completed: people can be loaded after 24 hours, and pressure can be heavy after 72 hours. (25 ° C prevails, the opening time at low temperature needs to be extended appropriately)

王中王论坛香港Corundum Series Epoxy Resin Concrete Curing Agent

Zhengzhou Kaiyuan Flooring Engineering Materials Co., Ltd.

Zhengzhou Kaiyuan Flooring Engineering Materials Co., Ltd. Manager Zhao: 15803889061
Phone: 0371-67133330 400-000-8464 Fax: 0371-60121005
Company Address: No. 26 Dongqing Street, High-tech Zone, Zhengzhou
banddigs.com Henan ICP No. 13007258-3