Open source floor hardener is a kind of abrasion-resistant material used in the concrete floor surface of industrial workshops. Open source floor hardeners are divided into non-metal aggregate hardeners and metal aggregate hardeners. Product colors include primary colors (cement), green, red, gray, yellow, brown, etc. Widely used in various light and heavy industrial plants, machinery manufacturing, processing workshops, large supermarkets, cotton textiles, garment factories, warehouses, logistics centers, commercial parking areas, etc.
The open source floor hardener is made of German technology. It consists of Portland cement, graded abrasion-resistant aggregate, special admixtures, inorganic toner and other raw materials. The hardener material is a pre-packaged powdery substance. The method is to directly spread on the fresh concrete surface layer, so that the material is tightly combined with the concrete slurry and uniformly penetrates into the integration. After the machine operation and light collection, the whole floor surface layer without delamination phenomenon is constructed to achieve high strength and resistance Grinding and compacting effect.
Kaiyuan floor hardener has been developed and improved by Kaiyuan Flooring Engineering Co., Ltd. in recent years, and has been well received by customers. Practice has proven that the open source hardener is a superior floor material, which has gradually replaced traditional ground materials such as terrazzo, and is one of the reliable materials for the floor of modern standard industrial plants.
The product usage (coverage) shall be appropriately increased according to the requirements and functions of different plant floors and according to the standard usage.
Metal wear-resistant hardened floor
Thickness: 3mm (according to the customer's needs, according to the standard amount of use, increase the amount appropriately.)
Standard colors: primary colors (cement), green, red, gray, yellow, brown.
Service life: more than 15 years
Surface morphology: with light
Floor features: extremely high abrasion resistance, corrosion resistance, impact resistance, dust reduction, antistatic, no fire.
Scope of application: warehouses, dock loading and unloading areas, garages, parking lots, oil depots, bridge decks, military industry automotive industry, electronics industry, etc.
① Plain treatment: use sandblasting or sanding to create rough surfaces, remove them and wet them with water;
② Concrete screed layer: Use concrete with a strength of C20 or more and cast cement mortar with a thickness of 30mm or more or fine stone concrete with a thickness of 50mm or more;
③ Gold steel sand layer: Firstly spread 2/3 hardener metal aggregate evenly, so that the material fully absorbs the water in the concrete, and smooth it with a troweling machine; then spread the remaining 1/3 hardener evenly and smooth. When the concrete is not damaged, smooth it again and close it;
④ Conservation layer: smooth it out and apply a layer of conservation layer immediately after the light is collected;
⑤ Construction is completed: people can be entered after 24 hours, and pressure can be applied after 7 days. (Based on 25 ° C, the opening time at low temperature needs to be extended appropriately)